Filter By:
- Parts & Accessories (19)
- Pedals (20)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Pedals
$19.99
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward
$12.99 - $14.99
- One-piece resin body
- Juvenile size platform
- Boron spindle
- 390g pair
$16.00 - $24.00
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats.
- Use: Road & Indoor Bike
- Material: Polyacetal + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 75g
$19.99
- Strapless design is easy to engage without fully committing to the pedal
- No special shoes required
- Improves pedaling efficiency
- Molded from unbreakable nylon
- Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase
- Includes mounting hardware. Note: metal plate may not be required during installation.
$19.99
A set of durable, SPD-compatible replacement cleats that come with all mounting hardware.
Get that fresh cleat feel
These solidly-built cleats work with any SPD-compatible pedals whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit.
Product details
- Compatible with all 2-bolt SPD-style pedals
- Directly compatible with Bontrager Comp MTB and Commuter pedals
- Includes mounting hardware
- Float: 4-deg
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit.
- Includes 36 steel pins and 2mm spacers to replace both sides of two pedals
- The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$16.79
- One-piece resin body
- Barefoot friendly rubber surface
- Includes reflectors
$19.99
- Galvanized steel pedal body
- 2-piece block platform
- Boron axle
- Plastic blocks w/ integrated reflector
- 553g pair
$12.99
- One-piece ABS resin body
- Non-slip rubber surface
- Boron spindle
- 388g pair
$18.89
- Nylon co-molded body with rubber tread surface
- Reflectors included
- 9/16"
$12.99
- One-piece resin body
- Chromoly spindle
- Toe clip compatible
- 366g pair
$10.49
- City/road half clips
- With reflectors
- No straps needed
- Resin
$16.79
- One-piece resin body with rubber surface for grip
- Boron spindle
- 400g pair
$14.69
- One-piece nylon body
- Chromoly spindle
- Toe clip compatible
- 407g pair
$17.29
- Fits most platform pedals
- Two wooden riser blocks w/durable rubber band
- Adds 3/4" to each side (1-1/2" total)
$15.99
The Thermalite pedals feature a concave, low profile design and are molded with Thermalite nylon material.
- Micro knurling with 24 pins for traction
- Recessed end to prevent damage to bearing cover
- Chromoly spindle with 6mm broach and 15mm wrench flats
- Weight: 391g
- Pedal Body Material: Composite/Plastic
$15.99
- Cleat covers to avoid wear and provide stability and grip while walking
- Lightweight, flexible and durable
$19.99 - $24.99
The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform.
- 17mm thick at center
- 105mm wide
- Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach
$13.99 - $19.99
Odyssey Twisted PC pedals-extremely simple, lightweight, inexpensive and famously durable plastic-bodied design.Often duplicated but never replicated.
- High-strength plastic composite
$19.99 - $21.99
The Twisted Pro pedal features a larger body shape, slimmer height and more concave.
- Loose-ball bearing
$16.00
The Cleat Shim-Spacer helps compensate for leg length discrepancies.
$18.00
- Shimano SPD-SL-style
- Engineered thermoplastic injection body
- Anti-slip walk pads
- Fixed position with no float
$10.00
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers.
- Compatible with Exustar cleat C01, C03, and C05
- Durable and flexible rubber
- Can be used with either floating or fixed position cleats
- Weight of only 14 grams/pair
$15.99
- Shimano SPD-SL-style
- Engineered thermoplastic injection body
- Weight of 24 grams per cleat
- 4.5-degree floating arc
Page 1 of 2
Next page