Parts

It's an all-new derailleur that's specifically designed and optimized to be motor-driven instead of cable-actuated. AXS powered components enable customization and scale to an individual rider's liking via the AXS App. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. The Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. In the event of an impact, the motor gearbox disengages, giving the derailleur freedom to move, and instantly returns back to its position for a seamless experience for the rider. The system is tested to IP69K water and dust proofing standard for creek crossings, mud splatterings and the resulting post-ride pressure washings. - Enduro focus and trail ready - Forged aluminum cage - Stainless hardware - Black/Polar colorways - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available.

Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Welcome Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. Features - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment - Offset: 40mm

Revelation is all grown up and ready to explore, wherever the trail may turn. Value-packed, the Revelation features an updated DebonAir spring paired with a Motion Control damper and 35mm Fast Black upper tubes. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Motion Control damping featuring low-speed compression adjustment to firm - Chassis is derived from the renowned Pike fork - New graphics package for a fresh, premium look

Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New graphics package for a fresh, premium look - Motion Control damping featuring low-speed compression adjustment

Your time on the bike is precious, let Shimano make it even better. Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven SERVO-WAVE technology. The Di2 platform untethers the shifters while delivering fast and reliable wireless shifting. BR-R8170 disc brake caliper brings a new level of control to the road cycling world with improved modulation and a quicker initial braking point. Despite its smaller construction, the system is quieter than ever and easier to maintain. - The wireless connection provides a clean cockpit, enhancing the aerodynamic effect and easy maintenance - Wider pad clearance decreases brake noise - Maintenance-friendly bleeding process - Unparalleled ergonomic features, such as raised hood peaks on levers - Brake control is optimized with light and smooth lever action - Enhanced modulation thanks to an expanded braking control area - Compatible with wireless or wired connection

The new mechanical Ergopower Super Record 12x2 Speed Rim Brake controls ergonomics, comfort, control, precision. The new mechanical Ergopower Super Record 12x2 Speed Rim Brake controls offer an important new feature: two brake lever positions that allow riders to choose the lever-handlebar distance that is most suited to the size of their hand. It does so whilst keeping braking efficiency constant the new angle of the up-shifting lever that prevents any possible contact with the curve of the handlebar. The position of the lever is adjusted by acting directly on the controls in a simple and safe manner. The Vari-Cushion technology offers ergonomic, comfortable and safe support and grip, ideal for riders who are in the saddle for many hours. The internals of the controls boast a concentration of technologies and experience, starting with the “one lever, one action” feature that assigns one function to each lever in order to prevent shifting errors when tired or distracted. This is followed by the option for multiple shifting that enables upshifting up to 3 sprockets at a time and downshifting up to 5 through the Ultra-Shift mechanism. The new Super Record 12x2 Speed Rim Brake levers introduce a double curvature to improve grip, which is lightened by three slots.

With the Super Deluxe Coil Ultimate, no-nonsense performance is the name of the game. The Super Deluxe Coil Ultimate was designed to meet all the demands of the latest and greatest hard-hitting enduro and trail bikes. Featuring Maxima Plush fluid, this shock offers solid threshold adjustment for pedaling performance, ride quality, and compression adjustment to fine-tune for any condition. It's got the unmistakable feel of a coil spring all packed into RockShox's Super Deluxe design. - Separate and independent open and threshold pistons tuned exactly for your ride - Low-Speed Compression adjustment allowing fine-tuning of compression needs from the base tune - Maxima Plush damping fluid reduces friction and silences damper noise - BoXXer Red coil Signature color option (sold separately) - Coil Spring Sold Separately

Record 12-Speed controls are aesthetically pleasing and functional. The unidirectional carbon design offers riders two different lever-handlebar positions to adapt different size hands, maximizing control. This results in consistent power, stiffness and reliability for when you need it. - Hydraulic disc brake actuation - Vari-Cushion technology offers an ergonomic, comfortable and safe support and grip - The “one lever-one action” feature assigns each lever one function to prevent shifting errors - Ultra-Shift mechanism enables upshifting up to three gears at a time, and downshifting a full five - Disc rotor sold separately Specifications: - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Adjustable Reach: Yes

The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 42mm max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru-axle and Whisky Parts Co. compression plug

The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat-mount disc brakes - Fender eyelets on outside of fork leg for easy mounting - 700c x 42mm or 650B x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches - Includes thru-axle and Whisky Parts Co. compression plug

Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch

Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance

The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug

Campagnolo's Super Record EPS Ergopower Shifter Set provides maximum smoothness during shifting thanks to the Ergopower inner mechanism, the low-friction rear derailleur, and dedicated cables and - The Ultra-Shift mechanism enables upshifting up to three gears at a time, and downshifting a full five - Unidirectional carbon fiber finish is sleek and durable - Offers additional brake lever positions for small hands - The "one lever-one action" feature assigns each lever one function to prevent shifting errors - Braking lever pivot is aligned with the slant of the Ergopower control so that more braking power is transmitted to the braking lever - The braking lever's double curve design helps to provide crisp braking in any hazardous situation - Re-designed lever hoods offer a better feel Specifications: - Front Der/Shifter Compatibility: Campy Record/Super Record EPS - Brake Lever Actuation: Short Pull - Rear Der/Shifter Compatibility: Campy Record/Super Record EPS - Adjustable Reach: Yes - Drivetrain Speeds: 12 - Weight: 280g

With multiple World Championship medals, EWS series wins and Olympic gold medals to its name, our XX Eagle cranks set the standard. The XX Eagle T-Type Wide crankset is the evolution of that standard. Carbon fiber engineered with a foam core to give both incredible strength and maximized stiffness. The XX Eagle Transmission crank also features a first-of-its-kind removable and replaceable bash guard system that riders will appreciate. - Carbon crank arms with foam core are extremely lightweight and provide maximum stiffness - Includes XX T-Type removable and replaceable 2-Guard aluminum bashguard to protect your chainring when riding rough terrain - 55mm Chainline - 174mm Q-factor - DUB bottom bracket and spacers NOT included

A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)

The legendary Vivid is like a “Trail Whisperer.” Even in the most impossible situations, RockShox's most rugged coil shock always knows just the right way to get it done. Any trail, any time. Nothing shakes the Vivid’s confidence. From downhill racing to extreme freeride, the Vivid combines extreme durability with the precise adjustments that matter when you’re going big. Laser-etched controls let you dial in beginning and ending-stroke rebound as well as low-speed compression, making this shock fly through rock gardens as smoothly as it absorbs a sudden drop in altitude. - WEIGHT: 468g - DAMPING: External beginning stroke rebound, ending stroke rebound, low speed compression - CONFIGURATIONS: 200x57mm, 216x63mm, 222x70mm, 240x76mm, 267x89mm - SPRING: Steel coil - SPRING ADJUST: Preload - SHAFT MATERIAL: 7075 aluminum - BODY MATERIAL: Forged aluminum - BODY FINISH: Hard anodized - OTHER: *Weight based on 222x70, no coil, no hardware

If you believe in better performance then you should believe in hydraulic road (HydroR) brakes. SRAM's award winning HydroR technology is the fulfillment of the promise of better braking, more control, and improved performance in all conditions. SRAM RED is delivering on the promise of braking confidence and security that brings speed control and stability to a new level. - RED ergonomics including Reach Adjust - SRAM Road 11-speed compatible - Optimized power and modulation for higher speeds and more control - Refined lever body design is more comfortable - Easy access bleed port means convenient service - Shift paddle design is lightweight and offers improved finger clearance - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

When you're racing against the clock, there's no room for mistakes, so Campagnolo's Record EPS TT Shift/Brake Levers ensure a perfect shift every time. In addition, flawless braking is always at hand thanks to the contoured, ergonomic carbon levers. And with easy-to-access buttons and the power of electronic shifting, you can switch gears even while braking.

Performance Creativity For the aficionados and the geeks and the fanboys and the freaks, a custom-painted crank is a place of pride. A painted hammer. A beautiful ax. Troy Lee and his team channeled the future of camo to design these cranks, and the future in the stiff, durable world of SRAM cranks is looking exceptionally bright. Specifications: - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Chainring Size: 32 - Crank Arm Length: 165mm, 170mm, 175mm - Chainline: 52.0mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD: Direct Mount (DM) - Crank Arm Material: Carbon

With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

The XG-1299 cassette completes the expression of the world's most accomplished and sought after bikes. Designed for use with our proven, reliable XD driver body, this 12-speed cassette offers a massive gear range. In independent tests, the X-Dome architecture is proven to yield the strongest cassette on the market. New shifting characteristics improve both inboard and outboard shifting as well as chain retention. - SRAM’s cassette manufacturing technology provides the greatest durability and lightest weight - All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance - XD driver body compatible Cogs - 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50 - 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52

The SRAM RED shift-brake controls feature a fresh new look and continue our philosophy of perfecting the interface between rider and bike. We have scrutinized everything, including the transition between handlebar and hoods, the grip texture, finger wrap, and the separate interfaces with both the shifter and brake lever. The result is an extremely comfortable, highly individual fit that makes the shift-brake controls feel like a natural extension of the rider. - SRAM Road 11-speed compatible - New clamp allows better fit and adjustment for modern carbon and ergo bars - Designed for Yaw front derailleurs - ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar - Individual Reach Adjust of brake and shift lever is easy to access and uses a standard hex key, putting the controls exactly where you want them - Larger carbon ErgoBlade lever improves shifting from the drops - DoubleTap technology delivers both shifts from a single lever - ZeroLoss shifting means shifts engage immediately - Compatible with cable brakes

The Super Record 12-Speed rear derailleur combines the highest quality materials for exceptional weight and unparalleled performance. The unidirectional carbon fiber front rocker arm reduces weight, with an innovative shape that envelopes the cassette better, thanks to 3D Embrace technology, creating a double effect: allowing the chain to maintain optimum traction at all times, thus increasing the speed, power and precision of shifting. - Carbon fiber-reinforced construction, to increase strength while keeping weight to a minimum - Optimized spring return for constant chain tension - Adjustment of the initial rear derailleur position - Removable pivot on the upper body - Optimized to work with cassettes from 11 to 34 teeth Specifications: - Largest Cog: 34 - Rear Derailleur Mount Type: 10x1 Standard - Chain Wrap Capacity (teeth): 37 - Cage Length: Medium - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12

- BCD: Direct Mount Shimano - Chainline: 55mm - Crank Arm Length: 170mm - Material: Aluminum - Interface: Hollowtech II - Speed: 11/12 - Crank Spindle Diameter: 24mm - Drivetrain Spacing: SuperBoost+ - Pedals Thread: 9/16''

The BB86 mountain bike standard was designed to integrate bearings into the bottom bracket for weight reduction. This kit works with the standard: it consists of two cups that are pressed into either side of the shell. There are two versions of this bottom bracket. Both come with CeramicSpeed Bearings installed into cups. The first is our long-life, low-drag Standard Bearing with hardened-steel races and our CeramicSpeed super-round, super hard balls. The second is our Coated bearing, which uses those same CeramicSpeed Balls installed on coated, hardened-steel races for longer life and less bearing drag. This CeramicSpeed BB86 Bottom Bracket meshes with cranks that have 24mm spindles, including both Shimano and FSA. CeramicSpeed standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That means an average 75% drag reduction compared to standard bottom brackets. The hardened-steel races feature CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Bearings last at least three times longer than other bearings. Coated Bearings drop friction further and increase lifespan to applying a coating to the races. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. In The Box - 2 bottom bracket cups with bearings installed - 2 dust covers with integrated spacers installed - Spacer tube - 10ml syringe of LongLife Grease - Sticker sheet

BSA is equivalent to English threading. English threading on MTBs mean a 73mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, such as Shimano, FSA, Rotor, and others. Choose between two bearing types for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. For MTBs, English threading, thanks to history, is pretty much the one threaded standard. It works great. 24mm spindles easily fit through the shell, allow for large bearings to be employed in the outside cups. What's more, they rarely creak and seal up well. Lots of things slow bikes down; bearings shouldn't be among them. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. The bearings last at least 3x longer than other bearings. Coated bearings have even less drag. These bearings come packed with LongLife Grease, best for muddy conditions. For less drag when riding in cleaner environs, you can coat the bearings with either All Round Grease or lowest drag TT and Track Grease, which is designed for clean conditions. In The Box - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10ml syringe of LongLife grease - Sticker sheet

The EVO386 standard is designed for oversized spindles. CeramicSpeed's kit for Shimano allows you to install Shimano or FSA cranks with 24mm spindles. The cups come with CeramicSpeed Bearings installed. Both CeramicSpeed Standard and Coated Bearings are available. Both utilize super smooth CeramicSpeed Balls and hardened-steel races. The latter has an additional metallic coating on the races to further smooth and harden the steel, further increasing life and lowering drag. The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system. The CeramicSpeed Standard Bearings feature an average drag reduction of 75% compared to stock bottom brackets. That translates into frictional drag of 0.3-0.4 watts per set, which is the result of great design, hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Coated Bearings are a step up as they reduce drag by 50% compared to our Standard Bearings and an improvement in bearing life by 60%. All Round Grease comes standard in the bearings, but can be replaced for lower drag TT and Track Grease or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker Sheet

The PF30 standard is widely used. To make it compatible with Shimano and other 24mm diameter cranks, as well as improve the system, select this bottom bracket. The package comes with two cups and CeramicSpeed Bearings installed. The cups have extended inner sleeves and join with a center section, reducing the likelihood of creaking and increasing the reliability of the system while also eliminating spindle rub on internal cables. The cups mate with 24/22mm crank spindles. There are two bearing options. Both Standard and Coated Bearings feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional feature: a 3-micron thick metallic layer over the races. This addition makes the races smoother and harder, lowering drag and increasing life. The CeramicSpeed Standard Bearings have only 0.3-0.4 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of great design, including hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer. The CeramicSpeed Coated Bearings last even longer and feature even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings. All Round Grease is installed in the bearings. It can be replaced for lower-drag TT and Track Grease or higher-durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet